Transient characterization of the mode switching process in the reversible solid oxide cell stack

Reversible solid oxide cells (RSOCs) is a promising energy storage and conversion technology requiring frequent switching between fuel cell mode and electrolysis mode in practice. Unfortunately, it may cause a large current density undershoot that has irreversible damage to the RSOC. Therefore, understanding the transient behaviors of the RSOC is critical for its efficient and durable operation. A three-dimensional transient model of a 30-cell SOC stack with an external manifold is established. From SOFC to SOEC, the mass transfer lag and slow heat transfer cause the current density of the stack requiring 2500 s to reach a steady state. And the bottom inlet way and the external manifold structure cause differences in the current density, molar fraction and temperature variation with time between different cells. The upper cells show a slower mass transfer rate and undergo greater temperature changes. The inconsistent temperature change gradients and temperature change rates among different cells will inevitably produce changing thermal stresses and bring irreversible mechanical losses to the stack. Similar transient characteristics are observed when switching from SOEC to SOFC. However, it takes longer time (3200 s) to achieve the final steady state.