Skip to main navigation Skip to search Skip to main content

Transient Aeroacoustic Analysis of Pitching Wing at Low Reynolds Number

Research output: Chapter in book / Conference proceeding › Chapter in an edited book (as author) › Academic research › peer-review

Abstract

This study investigates the aeroacoustics of a wing undergoing pitching motion in an anechoic wind tunnel at low Reynolds numbers. The study was made at wind speeds U ranges from 10 to 40 m/s. with the constant chord c = 0.05 cm and a NACA 0012 wing at chord-length-based Reynolds number varying from 3.2 x 104 to 1.3 x 105 and pitching rate A = αgc/2U ranges from 0.004 to 0.02. where αg is the time variation rate of the geometric angle of attack. We synchronously measured the transient flow field and acoustic pressures using particle image velocimetry and wavelet-based beamforming methods to study the transient noise generation processes. The results reveal that tonal noise at different frequencies can be generated due to vortex shedding and surface pressure scattering at the trailing edge. The flow due to the leading edge separation can also interact with the boundary layer around the trailing edge, halting the tonal noise generation process. Broadband noise is generated on the trailing edge of the wing and w ing tip. dominantly at high frequencies, and stopped when the αg equals zero.

Original languageEnglish
Title of host publicationFlinovia-Flow Induced Noise and Vibration Issues and Aspects-IV
PublisherSpringer Nature
Pages87-102
Number of pages16
ISBN (Electronic)9783031739354
ISBN (Print)9783031739347
DOIs
Publication statusPublished - 1 Jan 2025

Keywords

  • Beamforming
  • Pitching noise
  • Trailingedgenoise

ASJC Scopus subject areas

  • General Physics and Astronomy
  • General Engineering

Fingerprint

Dive into the research topics of 'Transient Aeroacoustic Analysis of Pitching Wing at Low Reynolds Number'. Together they form a unique fingerprint.

Cite this