Tapped Inductor Works on Switched Mode Power Converter for Electric Vehicle Power Conversion System

Jie Mei; K. W.Eric Cheng; Ka Wing Chan

doi:10.1109/PESA55501.2022.10038384

Tapped Inductor Works on Switched Mode Power Converter for Electric Vehicle Power Conversion System

Jie Mei
, K. W.Eric Cheng
, Ka Wing Chan

The Hong Kong Polytechnic University

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

Abstract

Switched-capacitor technique has a good application for voltage source circuits. On the other hand, the switched-inductor approach in current source circuits can also produce different possibilities for the output circuit. When the tapped inductor is added to the circuit, it will affect the load side again, and the way to access the circuit is different; it is conversion has an extensive range. This paper introduces the method, in the case where the components remain unchanged and the circuit connection mode changed, to make the output current change during the use of the relevant power circuit. How to calculate and design the power supply circuit you need according to your needs during the use of the appropriate power supply circuit. This circuit can be applied to photovoltaic cell output conversion, current mode motor control, and some energy distribution. It can also be used in electric vehicle (EV) power conversion. The current mode control is especially used for current mode charging of EV charger.

Original language	English
Title of host publication	Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022
Editors	Ka-wai Eric Cheng
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781665486682
DOIs	https://doi.org/10.1109/PESA55501.2022.10038384
Publication status	Published - Sept 2022
Event	9th International Conference on Power Electronics Systems and Applications, PESA 2022 - Hong Kong, Hong Kong Duration: 20 Sept 2022 → 22 Sept 2022

Publication series

Name	Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022

Conference

Conference	9th International Conference on Power Electronics Systems and Applications, PESA 2022
Country/Territory	Hong Kong
City	Hong Kong
Period	20/09/22 → 22/09/22

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

current source
power supply
switched-inductor
tapped inductor

ASJC Scopus subject areas

Electrical and Electronic Engineering
Control and Optimization
Energy Engineering and Power Technology

More information

10.1109/PESA55501.2022.10038384

Cite this

Mei, J., Cheng, K. W. E., & Chan, K. W. (2022). Tapped Inductor Works on Switched Mode Power Converter for Electric Vehicle Power Conversion System. In K. E. Cheng (Ed.), Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022 Article 10038384 (Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PESA55501.2022.10038384

Mei, Jie ; Cheng, K. W.Eric ; Chan, Ka Wing. / Tapped Inductor Works on Switched Mode Power Converter for Electric Vehicle Power Conversion System. Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022. editor / Ka-wai Eric Cheng. Institute of Electrical and Electronics Engineers Inc., 2022. (Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022).

@inproceedings{6c28479e81fe4f9783fc4af84f10ce5f,

title = "Tapped Inductor Works on Switched Mode Power Converter for Electric Vehicle Power Conversion System",

abstract = "Switched-capacitor technique has a good application for voltage source circuits. On the other hand, the switched-inductor approach in current source circuits can also produce different possibilities for the output circuit. When the tapped inductor is added to the circuit, it will affect the load side again, and the way to access the circuit is different; it is conversion has an extensive range. This paper introduces the method, in the case where the components remain unchanged and the circuit connection mode changed, to make the output current change during the use of the relevant power circuit. How to calculate and design the power supply circuit you need according to your needs during the use of the appropriate power supply circuit. This circuit can be applied to photovoltaic cell output conversion, current mode motor control, and some energy distribution. It can also be used in electric vehicle (EV) power conversion. The current mode control is especially used for current mode charging of EV charger.",

keywords = "current source, power supply, switched-inductor, tapped inductor",

author = "Jie Mei and Cheng, \{K. W.Eric\} and Chan, \{Ka Wing\}",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 9th International Conference on Power Electronics Systems and Applications, PESA 2022 ; Conference date: 20-09-2022 Through 22-09-2022",

year = "2022",

month = sep,

doi = "10.1109/PESA55501.2022.10038384",

language = "English",

series = "Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

editor = "Cheng, \{Ka-wai Eric\}",

booktitle = "Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022",

}

Mei, J, Cheng, KWE & Chan, KW 2022, Tapped Inductor Works on Switched Mode Power Converter for Electric Vehicle Power Conversion System. in KE Cheng (ed.), Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022., 10038384, Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022, Institute of Electrical and Electronics Engineers Inc., 9th International Conference on Power Electronics Systems and Applications, PESA 2022, Hong Kong, Hong Kong, 20/09/22. https://doi.org/10.1109/PESA55501.2022.10038384

Tapped Inductor Works on Switched Mode Power Converter for Electric Vehicle Power Conversion System. / Mei, Jie; Cheng, K. W.Eric; Chan, Ka Wing.
Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022. ed. / Ka-wai Eric Cheng. Institute of Electrical and Electronics Engineers Inc., 2022. 10038384 (Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022).

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

TY - GEN

T1 - Tapped Inductor Works on Switched Mode Power Converter for Electric Vehicle Power Conversion System

AU - Mei, Jie

AU - Cheng, K. W.Eric

AU - Chan, Ka Wing

PY - 2022/9

Y1 - 2022/9

N2 - Switched-capacitor technique has a good application for voltage source circuits. On the other hand, the switched-inductor approach in current source circuits can also produce different possibilities for the output circuit. When the tapped inductor is added to the circuit, it will affect the load side again, and the way to access the circuit is different; it is conversion has an extensive range. This paper introduces the method, in the case where the components remain unchanged and the circuit connection mode changed, to make the output current change during the use of the relevant power circuit. How to calculate and design the power supply circuit you need according to your needs during the use of the appropriate power supply circuit. This circuit can be applied to photovoltaic cell output conversion, current mode motor control, and some energy distribution. It can also be used in electric vehicle (EV) power conversion. The current mode control is especially used for current mode charging of EV charger.

AB - Switched-capacitor technique has a good application for voltage source circuits. On the other hand, the switched-inductor approach in current source circuits can also produce different possibilities for the output circuit. When the tapped inductor is added to the circuit, it will affect the load side again, and the way to access the circuit is different; it is conversion has an extensive range. This paper introduces the method, in the case where the components remain unchanged and the circuit connection mode changed, to make the output current change during the use of the relevant power circuit. How to calculate and design the power supply circuit you need according to your needs during the use of the appropriate power supply circuit. This circuit can be applied to photovoltaic cell output conversion, current mode motor control, and some energy distribution. It can also be used in electric vehicle (EV) power conversion. The current mode control is especially used for current mode charging of EV charger.

KW - current source

KW - power supply

KW - switched-inductor

KW - tapped inductor

UR - https://www.scopus.com/pages/publications/85149134029

U2 - 10.1109/PESA55501.2022.10038384

DO - 10.1109/PESA55501.2022.10038384

M3 - Conference article published in proceeding or book

AN - SCOPUS:85149134029

T3 - Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022

BT - Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022

A2 - Cheng, Ka-wai Eric

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 9th International Conference on Power Electronics Systems and Applications, PESA 2022

Y2 - 20 September 2022 through 22 September 2022

ER -

Mei J, Cheng KWE, Chan KW. Tapped Inductor Works on Switched Mode Power Converter for Electric Vehicle Power Conversion System. In Cheng KE, editor, Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022. Institute of Electrical and Electronics Engineers Inc. 2022. 10038384. (Proceedings of the 9th International Conference on Power Electronics Systems and Applications, PESA 2022). doi: 10.1109/PESA55501.2022.10038384

Tapped Inductor Works on Switched Mode Power Converter for Electric Vehicle Power Conversion System

Abstract

Publication series

Conference

UN SDGs

Keywords

ASJC Scopus subject areas

More information

Other files and links

Fingerprint

Cite this