Structural modification and biomechanical analysis of lumbar disc prosthesis: A finite element study

Background: Most ball-in-socket artificial lumbar disc implanted in the spine result in increased hypermobility of the operative level and overloading of the facet joint. Methods: A finite element model was established and validated for the lumbar spine (L1-L5). The structure of the Mobidisc prosthesis was modified, resulting in the development of two new intervertebral disc prostheses, Movcore and Mcopro. The prostheses were implanted into the L3/L4 level to simulate total disc replacement, and the biomechanical properties of the lumbar spine model were analyzed after the operation. Findings: Following the implantation of the prostheses, the mobility of operative level, peak stress of lumbar spine models, and peak stress of facet joint increased. The performance of mobility was found to be more similar between Movcore and Mobidisc. The mobility and facet joint peak stress of the Mcopro model decreased progressively with an increase in the Young's modulus of the artificial annulus during flexion, extension, and lateral bending. Among all the models, the Mcopro50 model had the mobility closest to the intact model. It showed a 3% decrease in flexion, equal range of motion in extension, a 9% increase in left lateral bending, a 7% increase in right lateral bending, and a 3% decrease in axial rotation. Interpretation: The feasibility of the new intervertebral disc prostheses, Movcore and Mcopro, has been established. The Mcopro prosthesis, which features an artificial annular structure, offers significant advantages in terms of reduced mobility of the operative level and peak stress of facet joint.