Plastic micro features produced by microwelding machine

H. Liu, Y. Xu, Kai Leung Yung, C. L. Kang, W. Tian

Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

Abstract

The method of using microwelding machine to fabricate micro features on a stainless steel micro mould has been studied. The micro features obtained from molding using an ultrasonic microwelding machine have shown distinctive characteristics. The microflow behavior of polymer melt during the microwelding process is also studied. The micro molds of 0.2mm thick and through holes of 0.05mm and 0.2mm in diameters were used. Results show micro features can be produced using the microwelding machine with molding speed comparable to that of micro injection molding.
Original languageEnglish
Title of host publicationMechatronics and Materials Processing I
Pages1453-1456
Number of pages4
DOIs
Publication statusPublished - 28 Sep 2011
Event2011 International Conference on Mechatronics and Materials Processing, ICMMP 2011 - Guangzhou, China
Duration: 18 Nov 201120 Nov 2011

Publication series

NameAdvanced Materials Research
Volume328-330
ISSN (Print)1022-6680

Conference

Conference2011 International Conference on Mechatronics and Materials Processing, ICMMP 2011
Country/TerritoryChina
CityGuangzhou
Period18/11/1120/11/11

Keywords

  • Micro feature
  • Micro molding
  • Microwelding

ASJC Scopus subject areas

  • Engineering(all)

Cite this