Piezoelectric energy harvesting using shear mode 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3single crystal cantilever

Bo Ren; Siu Wing Or; Yaoyao Zhang; Qinhui Zhang; Xiaobing Li; Jie Jiao; Wei Wang; Da'An Liu; Xiangyong Zhao; Haosu Luo

doi:10.1063/1.3327330

Piezoelectric energy harvesting using shear mode 0.71Pb(Mg_1/3Nb_2/3)O₃-0.29PbTiO₃single crystal cantilever

Bo Ren, Siu Wing Or, Yaoyao Zhang, Qinhui Zhang, Xiaobing Li, Jie Jiao, Wei Wang, Da'An Liu, Xiangyong Zhao, Haosu Luo

The Hong Kong Polytechnic University

Research output: Journal article publication › Journal article › Academic research › peer-review

89 Citations (Scopus)

Abstract

In this letter we presented a cantilever beam used for vibration energy harvesting based on shear mode 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3single crystal. The working principle of the device was inferred and the factors influencing the output were obtained using an analytical method. The electrical properties under different conditions were studied systematically. Under a cyclic force of 0.05 N (peak value), a peak voltage of 91.23 V, maximum power of 4.16 mW were measured at 60 Hz with a proof mass of 0.5 g. The results demonstrate the potential of the device in energy harvesting applied to low-power portable electronics and wireless sensors.

Original language	English
Article number	083502
Journal	Applied Physics Letters
Volume	96
Issue number	8
DOIs	https://doi.org/10.1063/1.3327330
Publication status	Published - 12 Mar 2010

ASJC Scopus subject areas

Physics and Astronomy (miscellaneous)

More information

10.1063/1.3327330

http://hdl.handle.net/10397/14053

Cite this

@article{1b1cb419ec104e3fa5568f906fbbd173,

title = "Piezoelectric energy harvesting using shear mode 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3single crystal cantilever",

abstract = "In this letter we presented a cantilever beam used for vibration energy harvesting based on shear mode 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3single crystal. The working principle of the device was inferred and the factors influencing the output were obtained using an analytical method. The electrical properties under different conditions were studied systematically. Under a cyclic force of 0.05 N (peak value), a peak voltage of 91.23 V, maximum power of 4.16 mW were measured at 60 Hz with a proof mass of 0.5 g. The results demonstrate the potential of the device in energy harvesting applied to low-power portable electronics and wireless sensors.",

author = "Bo Ren and Or, {Siu Wing} and Yaoyao Zhang and Qinhui Zhang and Xiaobing Li and Jie Jiao and Wei Wang and Da'An Liu and Xiangyong Zhao and Haosu Luo",

year = "2010",

month = mar,

day = "12",

doi = "10.1063/1.3327330",

language = "English",

volume = "96",

journal = "Applied Physics Letters",

issn = "0003-6951",

publisher = "American Institute of Physics",

number = "8",

}

TY - JOUR

T1 - Piezoelectric energy harvesting using shear mode 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3single crystal cantilever

AU - Ren, Bo

AU - Or, Siu Wing

AU - Zhang, Yaoyao

AU - Zhang, Qinhui

AU - Li, Xiaobing

AU - Jiao, Jie

AU - Wang, Wei

AU - Liu, Da'An

AU - Zhao, Xiangyong

AU - Luo, Haosu

PY - 2010/3/12

Y1 - 2010/3/12

N2 - In this letter we presented a cantilever beam used for vibration energy harvesting based on shear mode 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3single crystal. The working principle of the device was inferred and the factors influencing the output were obtained using an analytical method. The electrical properties under different conditions were studied systematically. Under a cyclic force of 0.05 N (peak value), a peak voltage of 91.23 V, maximum power of 4.16 mW were measured at 60 Hz with a proof mass of 0.5 g. The results demonstrate the potential of the device in energy harvesting applied to low-power portable electronics and wireless sensors.

AB - In this letter we presented a cantilever beam used for vibration energy harvesting based on shear mode 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3single crystal. The working principle of the device was inferred and the factors influencing the output were obtained using an analytical method. The electrical properties under different conditions were studied systematically. Under a cyclic force of 0.05 N (peak value), a peak voltage of 91.23 V, maximum power of 4.16 mW were measured at 60 Hz with a proof mass of 0.5 g. The results demonstrate the potential of the device in energy harvesting applied to low-power portable electronics and wireless sensors.

UR - http://www.scopus.com/inward/record.url?scp=77749279707&partnerID=8YFLogxK

U2 - 10.1063/1.3327330

DO - 10.1063/1.3327330

M3 - Journal article

SN - 0003-6951

VL - 96

JO - Applied Physics Letters

JF - Applied Physics Letters

IS - 8

M1 - 083502

ER -

Piezoelectric energy harvesting using shear mode 0.71Pb(Mg_1/3Nb_2/3)O₃-0.29PbTiO₃single crystal cantilever

Abstract

ASJC Scopus subject areas

More information

Other files and links

Fingerprint

Cite this