Numerical simulation on failure patterns of rock discs and rings subject to diametral line loads

W. C. Zhu, Kam Tim Chau, C. A. Tang

Research output: Journal article publicationConference articleAcademic researchpeer-review

6 Citations (Scopus)

Abstract

Brazilian test is a standardized test for measuring indirect tensile strength of rock and concrete disc (or cylinder). Similar test called indirect tensile test has also been used for other geomaterials. Although splitting of the disc into two halves is the expected failure mode, other rupture modes had also been observed. More importantly, the splitting tensile strength of rock can vary significantly with the specimen geometry and loading condition. In this study, a numerical code called RFPA2D (abbreviated from Rock Failure Process Analysis) is used to simulate the failure process of disc and ring specimens subject to Brazilian test. The failure patterns and splitting tensile strengths of specimens with different size and loading-strip-width are simulated and compared with existing experimental results. In addition, two distinct failure patterns observed in ring tests have been simulated using RFPA 2D and thus this verifies the applicability of RFPA2D in simulating rock failure process under static loads.
Original languageEnglish
Pages (from-to)1517-1522
Number of pages6
JournalKey Engineering Materials
Volume261-263
Issue numberII
Publication statusPublished - 28 Jul 2004
EventAdvances in Fracture and Failure Prevention: Proceedings of the Fifth International Conference on Fracture and Strength of Solids (FEOFS2003): Second International Conference on Physics and Chemistry of Fracture and Failure Prevention (2nd ICPCF) - Sendai, Japan
Duration: 20 Oct 200322 Oct 2003

Keywords

  • Brazilian tests
  • Failure patterns
  • Numerical simulations
  • Rock discs and rings

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemical Engineering (miscellaneous)

Cite this