Investigation on evolution of the alpha phase during cross wedge rolling of TC6 blade perform

Junling Li; Baoyu Wang; Jianguo Lin; Shuang Fang; Shuyun Wang; Chuanbao Zhu

doi:10.1016/j.promfg.2018.07.191

Investigation on evolution of the alpha phase during cross wedge rolling of TC6 blade perform

Junling Li
, Baoyu Wang (Corresponding Author)
, Jianguo Lin
, Shuang Fang
, Shuyun Wang
, Chuanbao Zhu

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

5 Citations (Scopus)

Abstract

TC6 alloy is an desirable material for blades of aviation engines and a cross wedge rolling process has been proposed to manufacture the blade preform. In this paper, microstructure model based on the Arvami equation which describes the evolution of the alpha phase has been developed and implemented into a 3D rigid-plastic FE model to simulate the whole cross wedge rolling process, including the transfer, deform and air cooling stages. Results show that the volume fraction of the alpha phase was increased in the transfer stage and it was graded distribution after deformed. Furthermore, air cooling process is required to obtain a qualified volume fraction of the alpha phase, and the time for air cooling is suggested to be 15-20 s in the given condition.

Original language	English
Title of host publication	Proceedings of the 17th International Conference on Metal Forming METAL FORMING 2018
Pages	168-175
Number of pages	8
Volume	15
DOIs	https://doi.org/10.1016/j.promfg.2018.07.191
Publication status	Published - Sept 2018
Externally published	Yes
Event	17th International Conference on Metal Forming, METAL FORMING 2018 - Toyohashi, Japan Duration: 16 Sept 2018 → 19 Sept 2018

Publication series

Name	Procedia Manufacturing
Publisher	Elsevier BV

Conference

Conference	17th International Conference on Metal Forming, METAL FORMING 2018
Country/Territory	Japan
City	Toyohashi
Period	16/09/18 → 19/09/18

Keywords

60Si2CrA steel
Austenitization kinetics
DEFORM-3D
User defined subroutine

ASJC Scopus subject areas

Industrial and Manufacturing Engineering
Artificial Intelligence

More information

10.1016/j.promfg.2018.07.191

Cite this

@inproceedings{d2ab8d1f56cf400198d2b35023a07293,

title = "Investigation on evolution of the alpha phase during cross wedge rolling of TC6 blade perform",

abstract = "TC6 alloy is an desirable material for blades of aviation engines and a cross wedge rolling process has been proposed to manufacture the blade preform. In this paper, microstructure model based on the Arvami equation which describes the evolution of the alpha phase has been developed and implemented into a 3D rigid-plastic FE model to simulate the whole cross wedge rolling process, including the transfer, deform and air cooling stages. Results show that the volume fraction of the alpha phase was increased in the transfer stage and it was graded distribution after deformed. Furthermore, air cooling process is required to obtain a qualified volume fraction of the alpha phase, and the time for air cooling is suggested to be 15-20 s in the given condition.",

keywords = "60Si2CrA steel, Austenitization kinetics, DEFORM-3D, User defined subroutine",

author = "Junling Li and Baoyu Wang and Jianguo Lin and Shuang Fang and Shuyun Wang and Chuanbao Zhu",

note = "Publisher Copyright: {\textcopyright} 2018 The Authors. Published by Elsevier B.V.; 17th International Conference on Metal Forming, METAL FORMING 2018 ; Conference date: 16-09-2018 Through 19-09-2018",

year = "2018",

month = sep,

doi = "10.1016/j.promfg.2018.07.191",

language = "English",

volume = "15",

series = "Procedia Manufacturing",

publisher = "Elsevier BV",

pages = "168--175",

booktitle = "Proceedings of the 17th International Conference on Metal Forming METAL FORMING 2018",

}

Li, J, Wang, B, Lin, J, Fang, S, Wang, S & Zhu, C 2018, Investigation on evolution of the alpha phase during cross wedge rolling of TC6 blade perform. in Proceedings of the 17th International Conference on Metal Forming METAL FORMING 2018. vol. 15, Procedia Manufacturing, pp. 168-175, 17th International Conference on Metal Forming, METAL FORMING 2018, Toyohashi, Japan, 16/09/18. https://doi.org/10.1016/j.promfg.2018.07.191

Investigation on evolution of the alpha phase during cross wedge rolling of TC6 blade perform. / Li, Junling; Wang, Baoyu (Corresponding Author); Lin, Jianguo et al.
Proceedings of the 17th International Conference on Metal Forming METAL FORMING 2018. Vol. 15 2018. p. 168-175 (Procedia Manufacturing).

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

TY - GEN

T1 - Investigation on evolution of the alpha phase during cross wedge rolling of TC6 blade perform

AU - Li, Junling

AU - Wang, Baoyu

AU - Lin, Jianguo

AU - Fang, Shuang

AU - Wang, Shuyun

AU - Zhu, Chuanbao

PY - 2018/9

Y1 - 2018/9

N2 - TC6 alloy is an desirable material for blades of aviation engines and a cross wedge rolling process has been proposed to manufacture the blade preform. In this paper, microstructure model based on the Arvami equation which describes the evolution of the alpha phase has been developed and implemented into a 3D rigid-plastic FE model to simulate the whole cross wedge rolling process, including the transfer, deform and air cooling stages. Results show that the volume fraction of the alpha phase was increased in the transfer stage and it was graded distribution after deformed. Furthermore, air cooling process is required to obtain a qualified volume fraction of the alpha phase, and the time for air cooling is suggested to be 15-20 s in the given condition.

AB - TC6 alloy is an desirable material for blades of aviation engines and a cross wedge rolling process has been proposed to manufacture the blade preform. In this paper, microstructure model based on the Arvami equation which describes the evolution of the alpha phase has been developed and implemented into a 3D rigid-plastic FE model to simulate the whole cross wedge rolling process, including the transfer, deform and air cooling stages. Results show that the volume fraction of the alpha phase was increased in the transfer stage and it was graded distribution after deformed. Furthermore, air cooling process is required to obtain a qualified volume fraction of the alpha phase, and the time for air cooling is suggested to be 15-20 s in the given condition.

KW - 60Si2CrA steel

KW - Austenitization kinetics

KW - DEFORM-3D

KW - User defined subroutine

UR - https://www.scopus.com/pages/publications/85063786876

U2 - 10.1016/j.promfg.2018.07.191

DO - 10.1016/j.promfg.2018.07.191

M3 - Conference article published in proceeding or book

AN - SCOPUS:85063786876

VL - 15

T3 - Procedia Manufacturing

SP - 168

EP - 175

BT - Proceedings of the 17th International Conference on Metal Forming METAL FORMING 2018

T2 - 17th International Conference on Metal Forming, METAL FORMING 2018

Y2 - 16 September 2018 through 19 September 2018

ER -

Investigation on evolution of the alpha phase during cross wedge rolling of TC6 blade perform

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

More information

Other files and links

Fingerprint

Cite this