Injection molded plastic microfluidic biochips with integrated pumping electrode

Long Biao Huang; Kai Leung Yung; Yan Xu; Yun Chuan Xie

doi:10.1109/NEMS.2010.5592588

Injection molded plastic microfluidic biochips with integrated pumping electrode

Long Biao Huang, Kai Leung Yung, Yan Xu, Yun Chuan Xie

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

3 Citations (Scopus)

Abstract

The plastic microfluidic biochip was successfully fabricated using micro-injection molding technique, and the gold sputtering was applied to fabricate the pumping electrode. Thermal-bonding technology was applied to integrate the microfluid and the pumping electrode. The experiment results show that the dimension of plastic microfluid biochip was in accordance with the nickel mold, which was fabricated by electroforming technology. The inner gas pressure of chamber, generated by electrolysis reaction under 20V, sharply increased enough to propel electrolytic solution to flow into microchannel.

Original language	English
Title of host publication	2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010
Pages	1017-1020
Number of pages	4
DOIs	https://doi.org/10.1109/NEMS.2010.5592588
Publication status	Published - 29 Nov 2010
Event	5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010 - Xiamen, China Duration: 20 Jan 2010 → 23 Jan 2010

Conference

Conference	5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010
Country/Territory	China
City	Xiamen
Period	20/01/10 → 23/01/10

ASJC Scopus subject areas

Control and Systems Engineering
Electrical and Electronic Engineering

More information

10.1109/NEMS.2010.5592588

Cite this

@inproceedings{80bbcbcef5394c85a6759baca3aabc40,

title = "Injection molded plastic microfluidic biochips with integrated pumping electrode",

abstract = "The plastic microfluidic biochip was successfully fabricated using micro-injection molding technique, and the gold sputtering was applied to fabricate the pumping electrode. Thermal-bonding technology was applied to integrate the microfluid and the pumping electrode. The experiment results show that the dimension of plastic microfluid biochip was in accordance with the nickel mold, which was fabricated by electroforming technology. The inner gas pressure of chamber, generated by electrolysis reaction under 20V, sharply increased enough to propel electrolytic solution to flow into microchannel.",

author = "Huang, {Long Biao} and Yung, {Kai Leung} and Yan Xu and Xie, {Yun Chuan}",

year = "2010",

month = nov,

day = "29",

doi = "10.1109/NEMS.2010.5592588",

language = "English",

isbn = "9781424465439",

pages = "1017--1020",

booktitle = "2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010",

note = "5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010 ; Conference date: 20-01-2010 Through 23-01-2010",

}

Huang, LB, Yung, KL, Xu, Y & Xie, YC 2010, Injection molded plastic microfluidic biochips with integrated pumping electrode. in 2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010., 5592588, pp. 1017-1020, 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010, Xiamen, China, 20/01/10. https://doi.org/10.1109/NEMS.2010.5592588

Injection molded plastic microfluidic biochips with integrated pumping electrode. / Huang, Long Biao; Yung, Kai Leung; Xu, Yan et al.
2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010. 2010. p. 1017-1020 5592588.

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

TY - GEN

T1 - Injection molded plastic microfluidic biochips with integrated pumping electrode

AU - Huang, Long Biao

AU - Yung, Kai Leung

AU - Xu, Yan

AU - Xie, Yun Chuan

PY - 2010/11/29

Y1 - 2010/11/29

N2 - The plastic microfluidic biochip was successfully fabricated using micro-injection molding technique, and the gold sputtering was applied to fabricate the pumping electrode. Thermal-bonding technology was applied to integrate the microfluid and the pumping electrode. The experiment results show that the dimension of plastic microfluid biochip was in accordance with the nickel mold, which was fabricated by electroforming technology. The inner gas pressure of chamber, generated by electrolysis reaction under 20V, sharply increased enough to propel electrolytic solution to flow into microchannel.

AB - The plastic microfluidic biochip was successfully fabricated using micro-injection molding technique, and the gold sputtering was applied to fabricate the pumping electrode. Thermal-bonding technology was applied to integrate the microfluid and the pumping electrode. The experiment results show that the dimension of plastic microfluid biochip was in accordance with the nickel mold, which was fabricated by electroforming technology. The inner gas pressure of chamber, generated by electrolysis reaction under 20V, sharply increased enough to propel electrolytic solution to flow into microchannel.

UR - http://www.scopus.com/inward/record.url?scp=78649249661&partnerID=8YFLogxK

U2 - 10.1109/NEMS.2010.5592588

DO - 10.1109/NEMS.2010.5592588

M3 - Conference article published in proceeding or book

SN - 9781424465439

SP - 1017

EP - 1020

BT - 2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010

T2 - 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010

Y2 - 20 January 2010 through 23 January 2010

ER -

Injection molded plastic microfluidic biochips with integrated pumping electrode

Abstract

Conference

ASJC Scopus subject areas

More information

Other files and links

Fingerprint

Cite this