Fatigue tests and design of diamond bird-beak SHS T-joints under axial loading in brace

Lewei Tong, Guowen Xu, Dongqiang Yan, Xiao Ling Zhao

Research output: Journal article publicationJournal articleAcademic researchpeer-review

22 Citations (Scopus)

Abstract

A diamond bird-beak square hollow section (SHS) T-joint is different from a conventional SHS T-joint as the brace and chord members both rotate 45°. This paper deals with fatigue behavior of such joints through fatigue tests and proposed fatigue design curves (Sr,hs-N curves). Diamond bird-beak SHS T-joints (DBB T-joints) with a unique set of geometric non-dimensional key parameters (β, 2γ and τ) were used for fatigue tests. Cracking patterns were observed during the fatigue tests. Based on the fatigue data and stress concentration factors (SCFs) derived by the authors of this paper, new fatigue design curves (Sr,hs-N curves) using hot spot stress concept were discussed by means of deterministic method and least-square method, respectively. Finally, fatigue strength was compared between DBB T-joints and conventional SHS T-joints. The results indicated that DBB T-joints have better fatigue behavior when β is not greater than 0.7.

Original languageEnglish
Pages (from-to)49-59
Number of pages11
JournalJournal of Constructional Steel Research
Volume118
DOIs
Publication statusPublished - 1 Mar 2016
Externally publishedYes

Keywords

  • Diamond bird-beak T-joint
  • Fatigue design
  • Fatigue test
  • Square hollow section (SHS)
  • Stress concentration factors

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction
  • Mechanics of Materials
  • Metals and Alloys

Fingerprint

Dive into the research topics of 'Fatigue tests and design of diamond bird-beak SHS T-joints under axial loading in brace'. Together they form a unique fingerprint.

Cite this