Experimental and numerical studies of elliptical hollow sections under axial compression and bending

Tak Ming Chan; L. Gardner

Experimental and numerical studies of elliptical hollow sections under axial compression and bending

Tak Ming Chan
, L. Gardner

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

14 Citations (Scopus)

Abstract

A series of tests were performed on hot-rolled steel elliptical hollow section members. Nineteen stub column tests and six four-point bending tests about the minor axis were conducted. Measurements were taken of cross-section geometry, local and global initial geometric imperfections and material properties in tension. Results including full load-end shortening curves for the stub column tests and full moment-deflection histories for the beam tests are presented; these results have been used to calibrate the numerical models and for the development of a system of cross-section slenderness parameters and limits.

Original language	English
Title of host publication	Tubular Structures XI - Proceedings of the 11th International Symposium and IIW International Conference on Tubular Structures
Pages	163-170
Number of pages	8
Publication status	Published - 1 Dec 2006
Externally published	Yes
Event	11th International Symposium and IIW International Conference on Tubular Structures - Quebec City, QC, Canada Duration: 31 Aug 2006 → 2 Sept 2006

Conference

Conference	11th International Symposium and IIW International Conference on Tubular Structures
Country/Territory	Canada
City	Quebec City, QC
Period	31/08/06 → 2/09/06

ASJC Scopus subject areas

Civil and Structural Engineering
Building and Construction

Cite this

@inproceedings{c25362d949074c16bc8ecff87895fa27,

title = "Experimental and numerical studies of elliptical hollow sections under axial compression and bending",

abstract = "A series of tests were performed on hot-rolled steel elliptical hollow section members. Nineteen stub column tests and six four-point bending tests about the minor axis were conducted. Measurements were taken of cross-section geometry, local and global initial geometric imperfections and material properties in tension. Results including full load-end shortening curves for the stub column tests and full moment-deflection histories for the beam tests are presented; these results have been used to calibrate the numerical models and for the development of a system of cross-section slenderness parameters and limits.",

author = "Chan, \{Tak Ming\} and L. Gardner",

year = "2006",

month = dec,

day = "1",

language = "English",

isbn = "0415402808",

pages = "163--170",

booktitle = "Tubular Structures XI - Proceedings of the 11th International Symposium and IIW International Conference on Tubular Structures",

note = "11th International Symposium and IIW International Conference on Tubular Structures ; Conference date: 31-08-2006 Through 02-09-2006",

}

Chan, TM & Gardner, L 2006, Experimental and numerical studies of elliptical hollow sections under axial compression and bending. in Tubular Structures XI - Proceedings of the 11th International Symposium and IIW International Conference on Tubular Structures. pp. 163-170, 11th International Symposium and IIW International Conference on Tubular Structures, Quebec City, QC, Canada, 31/08/06.

Experimental and numerical studies of elliptical hollow sections under axial compression and bending. / Chan, Tak Ming; Gardner, L.
Tubular Structures XI - Proceedings of the 11th International Symposium and IIW International Conference on Tubular Structures. 2006. p. 163-170.

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

TY - GEN

T1 - Experimental and numerical studies of elliptical hollow sections under axial compression and bending

AU - Chan, Tak Ming

AU - Gardner, L.

PY - 2006/12/1

Y1 - 2006/12/1

N2 - A series of tests were performed on hot-rolled steel elliptical hollow section members. Nineteen stub column tests and six four-point bending tests about the minor axis were conducted. Measurements were taken of cross-section geometry, local and global initial geometric imperfections and material properties in tension. Results including full load-end shortening curves for the stub column tests and full moment-deflection histories for the beam tests are presented; these results have been used to calibrate the numerical models and for the development of a system of cross-section slenderness parameters and limits.

AB - A series of tests were performed on hot-rolled steel elliptical hollow section members. Nineteen stub column tests and six four-point bending tests about the minor axis were conducted. Measurements were taken of cross-section geometry, local and global initial geometric imperfections and material properties in tension. Results including full load-end shortening curves for the stub column tests and full moment-deflection histories for the beam tests are presented; these results have been used to calibrate the numerical models and for the development of a system of cross-section slenderness parameters and limits.

UR - https://www.scopus.com/pages/publications/84859920040

M3 - Conference article published in proceeding or book

SN - 0415402808

SN - 9780415402804

SP - 163

EP - 170

BT - Tubular Structures XI - Proceedings of the 11th International Symposium and IIW International Conference on Tubular Structures

T2 - 11th International Symposium and IIW International Conference on Tubular Structures

Y2 - 31 August 2006 through 2 September 2006

ER -

Experimental and numerical studies of elliptical hollow sections under axial compression and bending

Abstract

Conference

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this