Evaluation of cup-wheel truing and error compensation in aspheric grinding

Xiaolong Ke, Xiaohui Lin, Jian Wang, Chunjin Wang

Research output: Journal article publicationJournal articleAcademic researchpeer-review

1 Citation (Scopus)

Abstract

The cup-wheel is adopted in arc grinding wheel truing and the non-contact displacement sensor is used for arc grinding wheel measurement. The radial run-out error and arc radius error after meshed are proposed to evaluate the quality of the truing. The matching truing measurement parameters are calculated based on the principle of aspheric grinding, by which truing error compensation grinding is carried out. The results of truing experiment show that the cup-wheel truing is an ideal truing method. Compared to tradition grinding, the effect of truing error compensation is obvious. The surface form errors after two compensation grinding decrease by 36.5% and 28.1%, respectively, which means the truing error compensation grinding can effectively improve accuracy.

Original languageEnglish
Article number044102
JournalQiangjiguang Yu Lizishu/High Power Laser and Particle Beams
Volume27
Issue number4
DOIs
Publication statusPublished - 1 Apr 2015
Externally publishedYes

Keywords

  • Cup-wheel truing
  • Error compensation
  • On-machine measurement
  • Optical aspheric lens
  • Truing evaluation

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Electrical and Electronic Engineering

Cite this