Contactless power resonant converter for intelligent systems

Ka Wai Eric Cheng; Y. Lu; Kin Wing Kwok; Y. L. Kwok

doi:10.1049/cp:20062240

Contactless power resonant converter for intelligent systems

Ka Wai Eric Cheng, Y. Lu, Kin Wing Kwok, Y. L. Kwok

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

Abstract

The paper examines the contactless power conversion using the contactless power transformer. The primary and secondary sides of the transformer are separated by a large air-gap and hence the power transfer can be obtained without physical contact. The characteristics of the gapped transformer, the compensation methodology and PLL control for the converter are investigated. Experimental results using the contactless power converter are presented. A resonant converter method is used that can realized the high leakage imposed in the transformer.

Original language	English
Title of host publication	7th IET International Conference on Advances in Power System Control, Operation and Management (APSCOM 2006)
Edition	523 CP
DOIs	https://doi.org/10.1049/cp:20062240
Publication status	Published - 1 Dec 2006
Event	7th IET International Conference on Advances in Power System Control, Operation and Management, APSCOM 2006 - Hong Kong, Hong Kong Duration: 30 Oct 2006 → 2 Nov 2006

Conference

Conference	7th IET International Conference on Advances in Power System Control, Operation and Management, APSCOM 2006
Country/Territory	Hong Kong
City	Hong Kong
Period	30/10/06 → 2/11/06

Keywords

Air-gap
Compensation
Contactless
Magnetics
Power conversion
Resonant converter
Transformer

ASJC Scopus subject areas

Electrical and Electronic Engineering

More information

10.1049/cp:20062240

Cite this

@inproceedings{a37fa1490f6b4dbbb0fb9e3a78c8315f,

title = "Contactless power resonant converter for intelligent systems",

abstract = "The paper examines the contactless power conversion using the contactless power transformer. The primary and secondary sides of the transformer are separated by a large air-gap and hence the power transfer can be obtained without physical contact. The characteristics of the gapped transformer, the compensation methodology and PLL control for the converter are investigated. Experimental results using the contactless power converter are presented. A resonant converter method is used that can realized the high leakage imposed in the transformer.",

keywords = "Air-gap, Compensation, Contactless, Magnetics, Power conversion, Resonant converter, Transformer",

author = "Cheng, {Ka Wai Eric} and Y. Lu and Kwok, {Kin Wing} and Kwok, {Y. L.}",

year = "2006",

month = dec,

day = "1",

doi = "10.1049/cp:20062240",

language = "English",

isbn = "0863412467",

booktitle = "7th IET International Conference on Advances in Power System Control, Operation and Management (APSCOM 2006)",

edition = "523 CP",

note = "7th IET International Conference on Advances in Power System Control, Operation and Management, APSCOM 2006 ; Conference date: 30-10-2006 Through 02-11-2006",

}

Cheng, KWE, Lu, Y, Kwok, KW & Kwok, YL 2006, Contactless power resonant converter for intelligent systems. in 7th IET International Conference on Advances in Power System Control, Operation and Management (APSCOM 2006). 523 CP edn, 7th IET International Conference on Advances in Power System Control, Operation and Management, APSCOM 2006, Hong Kong, Hong Kong, 30/10/06. https://doi.org/10.1049/cp:20062240

Contactless power resonant converter for intelligent systems. / Cheng, Ka Wai Eric; Lu, Y.; Kwok, Kin Wing et al.
7th IET International Conference on Advances in Power System Control, Operation and Management (APSCOM 2006). 523 CP. ed. 2006.

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

TY - GEN

T1 - Contactless power resonant converter for intelligent systems

AU - Cheng, Ka Wai Eric

AU - Lu, Y.

AU - Kwok, Kin Wing

AU - Kwok, Y. L.

PY - 2006/12/1

Y1 - 2006/12/1

N2 - The paper examines the contactless power conversion using the contactless power transformer. The primary and secondary sides of the transformer are separated by a large air-gap and hence the power transfer can be obtained without physical contact. The characteristics of the gapped transformer, the compensation methodology and PLL control for the converter are investigated. Experimental results using the contactless power converter are presented. A resonant converter method is used that can realized the high leakage imposed in the transformer.

AB - The paper examines the contactless power conversion using the contactless power transformer. The primary and secondary sides of the transformer are separated by a large air-gap and hence the power transfer can be obtained without physical contact. The characteristics of the gapped transformer, the compensation methodology and PLL control for the converter are investigated. Experimental results using the contactless power converter are presented. A resonant converter method is used that can realized the high leakage imposed in the transformer.

KW - Air-gap

KW - Compensation

KW - Contactless

KW - Magnetics

KW - Power conversion

KW - Resonant converter

KW - Transformer

UR - http://www.scopus.com/inward/record.url?scp=84869661762&partnerID=8YFLogxK

U2 - 10.1049/cp:20062240

DO - 10.1049/cp:20062240

M3 - Conference article published in proceeding or book

SN - 0863412467

SN - 9780863412462

BT - 7th IET International Conference on Advances in Power System Control, Operation and Management (APSCOM 2006)

T2 - 7th IET International Conference on Advances in Power System Control, Operation and Management, APSCOM 2006

Y2 - 30 October 2006 through 2 November 2006

ER -

Contactless power resonant converter for intelligent systems

Abstract

Conference

Keywords

ASJC Scopus subject areas

More information

Other files and links

Fingerprint

Cite this