Analytical solution for the full-range pull-out behavior of FRP ground anchors

Jian Jun Zheng, Jianguo Dai

Research output: Journal article publicationJournal articleAcademic researchpeer-review

57 Citations (Scopus)

Abstract

This paper attempts to predict the nonlinear pull-out response of fiber reinforced polymer (FRP) rods embedded in steel tubes filled with cement grout. Based on a tri-linear bond-slip model, the whole FRP rod is divided into three zones: linear elastic, softening, and frictional. In each zone, a set of two second-order ordinary differential equations are established in terms of the displacements of the FRP rod and steel tube and solved in an analytical manner. When the thickness of the steel tube approaches infinity, the solution can be applied to the problem of FRP rods embedded in rock. Based on the derived solution, the interfacial bond properties and snapback phenomenon are discussed. After the analytical solution is validated by comparisons with four sets of experimental data, the effects of the radius and length of FRP rods, the local peak bond stress and the residual frictional strength on the maximum pull-out load are evaluated through sensitivity analysis.
Original languageEnglish
Pages (from-to)129-137
Number of pages9
JournalConstruction and Building Materials
Volume58
DOIs
Publication statusPublished - 15 May 2014

Keywords

  • Analytical solution
  • Bond-slip relationship
  • FRP rod
  • Ground anchor
  • Pull-out

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction
  • General Materials Science

Fingerprint

Dive into the research topics of 'Analytical solution for the full-range pull-out behavior of FRP ground anchors'. Together they form a unique fingerprint.

Cite this