A real-time manufacturing risk management system: An integrated RFID approach

Kenneth T.C. Poon; King Lun Tommy Choy; Henry C.W. Lau

doi:10.1109/PICMET.2007.4349630

A real-time manufacturing risk management system: An integrated RFID approach

Kenneth T.C. Poon, King Lun Tommy Choy, Henry C.W. Lau

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

6 Citations (Scopus)

Abstract

It is inevitable to face production problems in various aspects such as human fallibility, defective processes and unreliable technologies in industrial manufacturing business. Thus, bar-code-based shop floor control systems have been widely adopted in order to monitor the production processes. Striking issues can be identified easily by those systems. However, potential and critical risks cannot be identified by those systems such that both operational effectiveness and economical profil are significantly affected. This paper proposes a RFID-based Risk Management System (RRMS) that not only identifies the potential risks during production processes, it also suggests relative solutions to tackle those risks. The proposed system integrates the technologies of RFID and rule-based reasoning (RBR) with risk management concept to help monitor shop floor operations. Through pilot running of the RRMS in the ABC Limited, a significant improvement in terms of shop floor responsiveness was achieved.

Original language	English
Title of host publication	PICMET '07 - Portland International Center for Management of Engineering and Technology - Proceedings Management of Converging Technologies
Pages	2872-2879
Number of pages	8
DOIs	https://doi.org/10.1109/PICMET.2007.4349630
Publication status	Published - 1 Dec 2007
Event	PICMET '07 - Portland International Center for Management of Engineering and Technology - Management of Converging Technologies - Portland, OR, United States Duration: 5 Aug 2007 → 9 Aug 2007

Conference

Conference	PICMET '07 - Portland International Center for Management of Engineering and Technology - Management of Converging Technologies
Country/Territory	United States
City	Portland, OR
Period	5/08/07 → 9/08/07

ASJC Scopus subject areas

General Engineering
Strategy and Management

More information

10.1109/PICMET.2007.4349630

Cite this

@inproceedings{dc6c2f89f45846f8b374c9f78b6e6a17,

title = "A real-time manufacturing risk management system: An integrated RFID approach",

abstract = "It is inevitable to face production problems in various aspects such as human fallibility, defective processes and unreliable technologies in industrial manufacturing business. Thus, bar-code-based shop floor control systems have been widely adopted in order to monitor the production processes. Striking issues can be identified easily by those systems. However, potential and critical risks cannot be identified by those systems such that both operational effectiveness and economical profil are significantly affected. This paper proposes a RFID-based Risk Management System (RRMS) that not only identifies the potential risks during production processes, it also suggests relative solutions to tackle those risks. The proposed system integrates the technologies of RFID and rule-based reasoning (RBR) with risk management concept to help monitor shop floor operations. Through pilot running of the RRMS in the ABC Limited, a significant improvement in terms of shop floor responsiveness was achieved.",

author = "Poon, {Kenneth T.C.} and Choy, {King Lun Tommy} and Lau, {Henry C.W.}",

year = "2007",

month = dec,

day = "1",

doi = "10.1109/PICMET.2007.4349630",

language = "English",

isbn = "1890843164",

pages = "2872--2879",

booktitle = "PICMET '07 - Portland International Center for Management of Engineering and Technology - Proceedings Management of Converging Technologies",

note = "PICMET '07 - Portland International Center for Management of Engineering and Technology - Management of Converging Technologies ; Conference date: 05-08-2007 Through 09-08-2007",

}

Poon, KTC, Choy, KLT & Lau, HCW 2007, A real-time manufacturing risk management system: An integrated RFID approach. in PICMET '07 - Portland International Center for Management of Engineering and Technology - Proceedings Management of Converging Technologies., 4349630, pp. 2872-2879, PICMET '07 - Portland International Center for Management of Engineering and Technology - Management of Converging Technologies, Portland, OR, United States, 5/08/07. https://doi.org/10.1109/PICMET.2007.4349630

A real-time manufacturing risk management system: An integrated RFID approach. / Poon, Kenneth T.C.; Choy, King Lun Tommy; Lau, Henry C.W.
PICMET '07 - Portland International Center for Management of Engineering and Technology - Proceedings Management of Converging Technologies. 2007. p. 2872-2879 4349630.

Research output: Chapter in book / Conference proceeding › Conference article published in proceeding or book › Academic research › peer-review

TY - GEN

T1 - A real-time manufacturing risk management system: An integrated RFID approach

AU - Poon, Kenneth T.C.

AU - Choy, King Lun Tommy

AU - Lau, Henry C.W.

PY - 2007/12/1

Y1 - 2007/12/1

N2 - It is inevitable to face production problems in various aspects such as human fallibility, defective processes and unreliable technologies in industrial manufacturing business. Thus, bar-code-based shop floor control systems have been widely adopted in order to monitor the production processes. Striking issues can be identified easily by those systems. However, potential and critical risks cannot be identified by those systems such that both operational effectiveness and economical profil are significantly affected. This paper proposes a RFID-based Risk Management System (RRMS) that not only identifies the potential risks during production processes, it also suggests relative solutions to tackle those risks. The proposed system integrates the technologies of RFID and rule-based reasoning (RBR) with risk management concept to help monitor shop floor operations. Through pilot running of the RRMS in the ABC Limited, a significant improvement in terms of shop floor responsiveness was achieved.

AB - It is inevitable to face production problems in various aspects such as human fallibility, defective processes and unreliable technologies in industrial manufacturing business. Thus, bar-code-based shop floor control systems have been widely adopted in order to monitor the production processes. Striking issues can be identified easily by those systems. However, potential and critical risks cannot be identified by those systems such that both operational effectiveness and economical profil are significantly affected. This paper proposes a RFID-based Risk Management System (RRMS) that not only identifies the potential risks during production processes, it also suggests relative solutions to tackle those risks. The proposed system integrates the technologies of RFID and rule-based reasoning (RBR) with risk management concept to help monitor shop floor operations. Through pilot running of the RRMS in the ABC Limited, a significant improvement in terms of shop floor responsiveness was achieved.

UR - http://www.scopus.com/inward/record.url?scp=47849097429&partnerID=8YFLogxK

U2 - 10.1109/PICMET.2007.4349630

DO - 10.1109/PICMET.2007.4349630

M3 - Conference article published in proceeding or book

SN - 1890843164

SN - 9781890843168

SP - 2872

EP - 2879

BT - PICMET '07 - Portland International Center for Management of Engineering and Technology - Proceedings Management of Converging Technologies

T2 - PICMET '07 - Portland International Center for Management of Engineering and Technology - Management of Converging Technologies

Y2 - 5 August 2007 through 9 August 2007

ER -

A real-time manufacturing risk management system: An integrated RFID approach

Abstract

Conference

ASJC Scopus subject areas

More information

Other files and links

Fingerprint

Cite this