Calculated based on number of publications stored in Pure and citations from Scopus
1988 …2025

Research activity per year

Filter
Conference article published in proceeding or book

Search results

  • 2019

    Meteorite Detection and Tracing with Deep Learning on FPGA Platform

    Tseng, K. K., Lin, J., Sun, H., Yung, K. L. & Ip, W. H., 29 May 2019, Genetic and Evolutionary Computing - Proceedings of the 12th International Conference on Genetic and Evolutionary Computing, 2018. Tseng, S.-P., Lin, J.C.-W., Sui, B. & Pan, J.-S. (eds.). Singapore: Springer Verlag, Vol. 834. p. 493-500 8 p. (Advances in Intelligent Systems and Computing; vol. 834).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    Open Access
  • Surface Model Extraction from Indentation Curves of Hyperelastic Simulation for Abnormality Detection

    Yang, Y., Yung, K. L., Hung, R. T. W., Foster, J. A. & Yu, K. M., 8 May 2019, 2019 International Symposium on Medical Robotics, ISMR 2019. Institute of Electrical and Electronics Engineers Inc., p. 1-7 8710188. (2019 International Symposium on Medical Robotics, ISMR 2019).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    Open Access
  • 2014

    A computer simulation method for mold optimization of rotational molded objects

    Ng, W. O., Chan, C. Y., Yung, K. L., Chen, H. & Lam, C. W., 2014, [Missing Source Name from PIRA]. p. 33-36 4 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2012

    Active scalable elastomer mold to ease demolding of high aspect ratio micro features

    Xu, Y., Yung, K. L. & Liu, H., 19 Dec 2012, Manufacturing Engineering and Automation II. p. 880-883 4 p. (Advanced Materials Research; vol. 591-593).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Alignment of carbon nanotubes in polystyrene using vibration and electric field

    Xu, Y., Chen, W. & Yung, K. L., 19 Dec 2012, Manufacturing Engineering and Automation II. p. 1117-1120 4 p. (Advanced Materials Research; vol. 591-593).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Comparisons of different elastomer micro molds

    Liu, H., Yan, X., Kang, C. L., Yung, K. L. & Chen, W., 19 Dec 2012, Manufacturing Engineering and Automation II. p. 997-1000 4 p. (Advanced Materials Research; vol. 591-593).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Laser drilling on elastomeric polymers

    Kang, C. L., Yan, X., Yung, K. L., Chen, W. & Liu, H., 19 Dec 2012, Manufacturing Engineering and Automation II. p. 307-310 4 p. (Advanced Materials Research; vol. 591-593).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Laser induced forward transfer

    Kang, C. L., Xu, Y., Yung, K. L. & Chen, W., 19 Dec 2012, Manufacturing Engineering and Automation II. p. 1135-1138 4 p. (Advanced Materials Research; vol. 591-593).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    2 Citations (Scopus)
  • The interface behavior of micro overmolding

    Liu, H., Xu, Y., Yung, K. L. & Kang, C. L., 19 Dec 2012, Manufacturing Engineering and Automation II. p. 896-899 4 p. (Advanced Materials Research; vol. 591-593).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2011

    Plastic micro features produced by microwelding machine

    Liu, H., Xu, Y., Yung, K. L., Kang, C. L. & Tian, W., 28 Sept 2011, Mechatronics and Materials Processing I. p. 1453-1456 4 p. (Advanced Materials Research; vol. 328-330).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Polymer nanowire arrays with high thermal conductivity and superhydrophobicity fabricated by a nano-moulding technique

    Cao, B. Y., Kong, J., Xu, Y., Yung, K. L. & Cai, A., 1 Dec 2011, ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2011. Vol. 2. p. 489-495 7 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Rapidly identify the critical parameter of mems device based on element model library

    He, Y., Jiang, C., Yuan, W., Yung, K. L. & Xu, Y., 1 Aug 2011, MEMS/NEMS Nano Technology. p. 684-689 6 p. (Key Engineering Materials; vol. 483).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Selection of solar energy for green building using superiority and inferiority multi-criteria

    Chan, C. C. S., Yu, K. M. & Yung, K. L., Jul 2011, [Missing Source Name from PIRA]. Faculty of Construction and Land Use, Hong Kong Polytechnic University

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic research

    Open Access
  • Selection of solar energy for green building using superiority and inferiority multi-criteria ranking (SIR) method

    Chan, C. C. S., Yu, K. M. & Yung, K. L., 2011, Proceedings - 3rd International Postgraduate Conference on Infrastructure and Environment, IPC 2011. Liu, S. Z., Javed, A. A., Ni, F. D. & Shen, A. W. (eds.). Faculty of Construction and Land Use, The Hong Kong Polytechnic University, Vol. 1. p. 45-52 8 p. (Proceedings - 3rd International Postgraduate Conference on Infrastructure and Environment, IPC 2011; vol. 1).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    5 Citations (Scopus)
  • 2010

    Application of chaos in network video security

    Zhang, Z., Tong, J., Chen, Z., Ip, W. H., Chan, C. Y. & Yung, K. L., 3 Dec 2010, Information Computing and Applications - First International Conference, ICICA 2010, Proceedings. M4D ed. p. 229-236 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6377 LNCS, no. M4D).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Carbon nanotube-assisted microwave thermal bonding of plastic biochip

    Wong, J. L. P., Lee, M. H. T. & Yung, K. L., 1 Dec 2010, Proceedings of the 7th IASTED International Conference on Biomedical Engineering, BioMED 2010. Vol. 2. p. 131-133 3 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Chaotic hybrid algorithm and its application in circle detection

    Wu, C. H., Dong, N., Ip, W. H., Chan, C. Y., Yung, K. L. & Chen, Z. Q., 21 May 2010, Applications of Evolutionary Computation - EvoApplicatons 2010: EvoCOMPLEX, EvoGAMES, EvoIASP, EvoINTELLIGENCE, EvoNUM, and EvoSTOC, Proceedings. PART 1 ed. p. 302-311 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6024 LNCS, no. PART 1).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    22 Citations (Scopus)
  • Green manufacturing using integrated decision tools

    Chan, C. C. S., Yu, K. M. & Yung, K. L., 1 Dec 2010, IEEM2010 - IEEE International Conference on Industrial Engineering and Engineering Management. p. 2287-2291 5 p. 5674169

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    18 Citations (Scopus)
  • Green product development by using life cycle assessment (LCA), theory of Inventive of Problems solving (TRIZ)

    Chan, C. C. S., Yu, K. M. & Yung, K. L., 1 Dec 2010, Proceedings - 2010 International Conference on Manufacturing Automation, ICMA 2010. p. 24-29 6 p. 5695151

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    7 Citations (Scopus)
  • Injection molded plastic microfluidic biochips with integrated pumping electrode

    Huang, L. B., Yung, K. L., Xu, Y. & Xie, Y. C., 29 Nov 2010, 2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010. p. 1017-1020 4 p. 5592588

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    3 Citations (Scopus)
  • Rapid synthesis of MEMS devices based on element model library and metamodel

    He, Y., Jiang, C., Yung, K. L., Xu, Y. & Yuan, W., 29 Nov 2010, 2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010. p. 301-305 5 p. 5592221

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2009

    Applying chaotic particle swarm optimization to the template matching problem

    Wu, C., Dong, N., Ip, W., Chen, Z. & Yung, K. L., 1 Dec 2009, Advances in Computation and Intelligence - 4th International Symposium, ISICA 2009, Proceedings. p. 411-421 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5821 LNCS).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    2 Citations (Scopus)
  • 2007

    A generic system monitoring technique by using similarity recognition on the flowing entity pattern

    Tang, C. S., Chan, C. Y. & Yung, K. L., 1 Dec 2007, Proceedings - Third International Conference on Natural Computation, ICNC 2007. Vol. 5. p. 389-393 5 p. 4305076

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2006

    A generic reconfigurable agent model for distributed manufacturing system

    Wang, Q., Yung, K. L. & Ip, W. H., 1 Dec 2006, Proceedings of the IEEE International Conference on Control Applications. p. 1438-1443 6 p. 4776853

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    2 Citations (Scopus)
  • Convenient method to fabricating complicated microstructures on thermoplastics

    Jin, B. K., Yung, K. L., Xu, Y. & Chan, C. Y., 2006, Materials science forum. Trans Tech Publications Ltd, p. 685-688 4 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Convenient method to fabricating complicated microstructures on thermoplastics

    Jin, B. K., Yung, K. L., Xu, Y. & Chan, C. Y., 1 Dec 2006, Advances in Materials Manufacturing Science and Technology II - Selected Papers from the 12th International Manufacturing Conference in China. p. 685-688 4 p. (Materials Science Forum; vol. 532-533).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Effects of surface conditions on pheological properties and phase orientation of sheared LCP melts in nanochannels by MD studies

    He, L., Yung, K. L., Shen, Y. W. & Xu, Y., 2006, Materials science forum. Trans Tech Publications Ltd, p. 624-627 4 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Effects of surface conditions on rheological properties and phase orientation of sheared lcp melts in nanochannels by MD studies

    He, L., Yung, K. L., Shen, Y. W. & Xu, Y., 1 Dec 2006, Advances in Materials Manufacturing Science and Technology II - Selected Papers from the 12th International Manufacturing Conference in China. p. 624-627 4 p. (Materials Science Forum; vol. 532-533).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Mechanical event simulation of drop testing for toy product

    Yam, A. Y. K., Yung, K. L. & Lam, C. W., 1 Dec 2006, Advances in Materials Manufacturing Science and Technology II - Selected Papers from the 12th International Manufacturing Conference in China. p. 993-996 4 p. (Materials Science Forum; vol. 532-533).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • MMAP: An intelligent object paradigm for the monitoring and control of mobile-enterprise

    Jiang, X. N. & Yung, K. L., 1 Dec 2006, Advances in Materials Manufacturing Science and Technology II - Selected Papers from the 12th International Manufacturing Conference in China. p. 1168-1171 4 p. (Materials Science Forum; vol. 532-533).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Optimization of control strategy of a serial supply chain based on pheromone evolutionary algorithm

    Huang, M., Ding, J., Liu, Z., Ip, W. H., Yung, K. L. & Wang, X., 1 Dec 2006, 2006 IEEE Congress on Evolutionary Computation, CEC 2006. p. 2707-2712 6 p. 1688647

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • PSO based single strategy risk programming problem for virtual enterprise

    Huang, M., Wu, X., Wang, X., Ip, W. H. & Yung, K. L., 1 Dec 2006, Proceedings of the 2006 American Control Conference. Vol. 2006. p. 4506-4510 5 p. 1657429

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    1 Citation (Scopus)
  • Studies on the solid conveying process in micro injection molding machine

    Xu, Y., Yung, K. L. & Ng, H. P., 1 Dec 2006, Advances in Materials Manufacturing Science and Technology II - Selected Papers from the 12th International Manufacturing Conference in China. p. 620-623 4 p. (Materials Science Forum; vol. 532-533).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • The development of a generic technique for flow line monitoring

    Tang, C. S. (Corresponding Author), Chan, C. Y. & Yung, K. L., 20 Jun 2006, IMECS 2006 - International MultiConference of Engineers and Computer Scientists 2006. 1 ed. Vol. 14. p. 651-655 5 p. (Lecture Notes in Engineering and Computer Science).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    1 Citation (Scopus)
  • The development of a generic technique for flow line monitoring

    Tang, C. S., Chan, C. Y. & Yung, K. L., 1 Dec 2006, IMECS 2006 - International MultiConference of Engineers and Computer Scientists 2006. p. 651-655 5 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    1 Citation (Scopus)
  • The research on the optimal control strategy of a serial supply chain based on GA

    Huang, M., Ding, J., Ip, W. H., Yung, K. L., Liu, Z. & Wang, X., 1 Jan 2006, Advances in Natural Computation - Second International Conference, ICNC 2006, Proceedings,. Springer Verlag, p. 657-665 9 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4221 LNCS - I).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    3 Citations (Scopus)
  • The risk programming of virtual enterprises based on algorithms of Min / Max / Mean / Random-PSO

    Huang, M., Wu, X., Wang, X., Ip, W. H. & Yung, K. L., 1 Dec 2006, 2006 1st IEEE Conference on Industrial Electronics and Applications. 4025806

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2005

    A new model for ERP assisted partnership development in outsourcing

    Wong, S. F. & Yung, K. L., 1 Dec 2005, 2005 International Conference on Services Systems and Services Management, Proceedings of ICSSSM'05. Vol. 1. p. 602-607 6 p. 1499543

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    2 Citations (Scopus)
  • A new simulation method of interaction between a liquid crystalline polymer and two serrated walls

    He, L., Yung, K. L., Xu, Y. & Shen, Y. W., 1 Jan 2005, Proceedings of the World Tribology Congress III - 2005. Vol. 2. p. 827-828 2 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Forms of static friction, sliding friction and rolling friction

    Xu, Y. & Yung, K. L., 1 Dec 2005, Proceedings of the World Tribology Congress III - 2005. p. 399-400 2 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    2 Citations (Scopus)
  • Lagrange relaxation decomposition for synchronized production and transportation planning with flexible vehicles

    Tang, J., Yung, K. L. & Liu, S., 1 Dec 2005, 2005 International Conference on Services Systems and Services Management, Proceedings of ICSSSM'05. Vol. 1. p. 357-361 5 p. 1499495

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    8 Citations (Scopus)
  • The effects of static frictions on the drilling proces of hammer-drill system

    Xu, Y., Yung, K. L. & Ko, S. M., 1 Dec 2005, Proceedings of the World Tribology Congress III - 2005. p. 285-286 2 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • The effects of static frictions on the drilling process of hammer-drill system

    Xu, Y., Yung, K. L. & Ko, S. M., 2005, [Missing Source Name from PIRA]. Vol. 1. p. 285-286 2 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2004

    A miniaturized oscillating pump for osteoporosis investigation

    Yung, K. L., Ko, S. M. & Xu, Y., 1 Dec 2004, Proceedings of the IEEE International Conference on Mechatronics 2004, ICM'04. p. 215-217 3 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2003

    A pattern-based evolving mechanism for genetic algorithm to solve combinatorial optimization problems

    Wang, Q., Yung, K. L. & Ip, W. H., 1 Jan 2003, SMCia 2003 - Proceedings of the 2003 IEEE International Workshop on Soft Computing in Industrial Applications. IEEE, p. 97-101 5 p. 1231351

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    1 Citation (Scopus)
  • Profile tracking control of hybrid stepping motors using a learning method

    Chen, W. D., Feng, G. & Yung, K. L., 1 Jan 2003, Proceedings - 2003 IEEE International Conference on Robotics, Intelligent Systems and Signal Processing, RISSP 2003. Institute of Electrical and Electronics Engineers Inc., p. 208-213 6 p. 1285575

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2002

    The system dynamic based simulation analysis of a virtual enterprise

    Min, H., Yung, K. L., Wang, X. & Ip, W. H., 2002, The 2002 International Conference on Control and Automation : final program and book of abstracts : Xiamen, Fujian Province, China, June 16-19, 2002. IEEE

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 1999

    Dual control of closed-loop stepping motor precision servo

    Yung, K. L., Mak, S. T. & Cheng, D. K. W., 1 Dec 1999, Proceedings of the International Conference on Power Electronics and Drive Systems. p. 803-808 6 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    3 Citations (Scopus)
  • Enhancing low-speed performance of hybrid stepping motor servo by ripple canceling technique

    Chen, W. D., Yung, K. L. & Cheng, K. W., 1 Dec 1999, IEEE International Electric Machines and Drives Conference, IEMDC 1999 - Proceedings. p. 147-149 3 p. 769055

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    5 Citations (Scopus)
  • 1993

    Simulation analysis of a novel precision motor drive to improve servo performance

    Yung, K. L., Cheng, K. W., Liu, H. & Kwan, K. H., 1993, Proceedings of Power Conversion Conference - Yokohama 1993. Institute of Electrical and Electronics Engineers Inc., p. 563-568 6 p. 264194. (Proceedings of Power Conversion Conference - Yokohama 1993).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    1 Citation (Scopus)