Calculated based on number of publications stored in Pure and citations from Scopus
20122023

Research activity per year

Filter
Conference article published in proceeding or book

Search results

  • 2023

    An Investigation of the precision hot embossing process for micro-nano structured surfaces on chalcogenide glass

    Zhu, Z., Zhou, T., Cheung, C. F., Wang, C., Ruan, H. & Yang, X., Nov 2023, The 10th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2023). p. e-copy 4 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Numerical and experimental study of roll-to-plate hot embossing process of optical microstructures

    Zhu, Z., Li, K., Cheung, C. F., Wang, C., Ruan, H. & Yang, X., Aug 2023, The 8th Asia Pacific Conference on Optics Manufacture (APCOM2023) & 3rd International Forum of Young Scientists on Advanced Optical Manufacturing (YSAOM2023). p. e-copy 7 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2022

    A high-fidelity digital twin approach for the optimisation of fluid jet polishing process

    Liu, C., WANG, CHUNJIN., Zhang, Z., Lyu, P. & Cheung, C. F., 26 May 2022, Procedia CIRP. Vol. 107. p. 101-106 6 p. (Procedia CIRP).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    Open Access
    1 Citation (Scopus)
  • An Investigation of Maskless Fluid Jet Polishing of Three Dimensional Structured Surfaces

    Wang, C., Zhang, Z., Cheung, C. F. & Ho, L. T., 3 Jun 2022, Proceedings of the 22nd International Conference of the European Society for Precision Engineering and Nanotechnology. Leach, R. K., Akrofi-Ayesu, A., Nisbet, C. & Phillips, D. (eds.). euspen, p. ecopy 4 p. (Proceedings of the 22nd International Conference of the European Society for Precision Engineering and Nanotechnology).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    Open Access
  • A study of surface morphology evolution in fluid jet polishing

    Zhang, Z., Cheung, C. F., Wang, C., Ho, L. T. & Guo, J., Oct 2022, Proceedings - ASPE 2022 Annual Meeting. American Society for Precision Engineering, ASPE, p. 116-121 7 p. (Proceedings - ASPE 2022 Annual Meeting).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    Open Access
  • Investigation of the material removal process in fluid line-jet polishing by CFD simulation

    Zhang, Z., Wang, C., Cheung, C. F., Ho, L. T. & Guo, J., Aug 2022, nanoMan 2022 and AETS 2022 - 2022 8th International Conference on Nanomanufacturing and 4th AET Symposium on ACSM and Digital Manufacturing. Xie, W., Liu, Q., Wang, Z. & Luo, X. (eds.). Institute of Electrical and Electronics Engineers Inc., 6 p. (nanoMan 2022 and AETS 2022 - 2022 8th International Conference on Nanomanufacturing and 4th AET Symposium on ACSM and Digital Manufacturing).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Theoretical Modelling of Subsurface Damage in Ultra-Precision Grinding of Fused Silica

    Zhang, F., Xiao, H., Cheung, C. F. & Wang, C., Aug 2022, nanoMan 2022 and AETS 2022 - 2022 8th International Conference on Nanomanufacturing and 4th AET Symposium on ACSM and Digital Manufacturing (Nanoman-AETS). Xie, W., Liu, Q., Wang, Z. & Luo, X. (eds.). Institute of Electrical and Electronics Engineers Inc., 5 p. (nanoMan 2022 and AETS 2022 - 2022 8th International Conference on Nanomanufacturing and 4th AET Symposium on ACSM and Digital Manufacturing).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Toolpath generation based on innovative rotary coordinate and shuttling element in ultra-precision diamond turning of optical microstructures

    Lu, X., Cheung, C. F., Wang, C. & Ho, L. T., Aug 2022, nanoMan 2022 and AETS 2022 - 2022 8th International Conference on Nanomanufacturing and 4th AET Symposium on ACSM and Digital Manufacturing (Nanoman-AETS). Xie, W., Liu, Q., Wang, Z. & Luo, X. (eds.). Institute of Electrical and Electronics Engineers Inc., 6 p. (nanoMan 2022 and AETS 2022 - 2022 8th International Conference on Nanomanufacturing and 4th AET Symposium on ACSM and Digital Manufacturing).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2021

    A study of magnetic field-assisted mass polishing of additive manufactured surfaces

    Cheung, C. F., Wang, C., Loh, Y. M. & Ho, L. T., Jun 2021, Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021. Leach, R. K., Nisbet, C. & Phillips, D. (eds.). euspen, p. 359-362 4 p. (Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    Open Access
  • 2019

    An investigation of factors affecting surface generation in ultrasonic vibration assisted diamond cutting of hard-brittle materials

    Cheung, C. F., Wang, C., Chen, J., Robertson, D., Bulla, B. & Ho, L. T., 3 Jun 2019, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019. Leach, R. K., Billington, D., Nisbet, C. & Phillips, D. (eds.). euspen, p. 448-451 4 p. (European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    Open Access
  • An Investigation of Factors Affecting the Surface Generation of Magnetic Field Assisted Mass Polishing (MAMP) of Freeform Surfaces

    Ho, L. T., Cheung, C. F., Wang, C. & Loh, Y. M. K., 12 Nov 2019, Proceedings of The 8th Int. Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN). Asian Society for Precision Engineering and Nanotechnology, 4 p. B13

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Feasibility Study on Fluid Jet Polishing of Structured Surfaces

    Wang, C., Cheung, C. F., Lu, Y. J. & Kong, L., 6 Dec 2019, Proceedings of The 22nd International Symposium on Advances in Abrasive Technology (ISAAT). 8 p.

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    Open Access
  • Fluid Jet Array Finishing of 3D Printed Components

    Wang, C., Cheung, C. F., Ho, L. T. & Guo, J., 12 Nov 2019, Proceedings of the 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN). Asian Society for Precision Engineering and Nanotechnology, 4 p. B11

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • 2014

    Effect of the inflated-pressure to the tool influence function for polishing using SR bonnet

    Wang, C., Yang, X., Zhong, B., Wang, Z., Guo, Y. & Xu, Q., 2014, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. Li, S., Yang, L. & Ruch, E. (eds.). SPIE, Vol. 9281. 92810U. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9281).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    2 Citations (Scopus)
  • 2013

    Compensation and experiment research of machining error for optical aspheric precision grinding

    Ke, X. L., Guo, Y. B. & Wang, C. J., 2013, Advances in Abrasive Technology XVI. p. 103-107 5 p. (Advanced Materials Research; vol. 797).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Research on the normal error of large aspheric mirror employed in bonnet polishing

    Yang, W. & Wang, C. J., 2013, Materials Design, Processing and Applications. p. 3321-3324 4 p. (Advanced Materials Research; vol. 690-693).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    2 Citations (Scopus)
  • Research on the optimization of the bonnet polishing tool

    Wang, C., Yang, W., Wang, Z., Pan, R. & Guo, Y., 2013, Advances in Mechatronics and Control Engineering. Kim, Y-H. & Yarlagadda, P. (eds.). p. 406-413 8 p. (Applied Mechanics and Materials; vol. 278-280).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

    3 Citations (Scopus)
  • 2012

    An on-line condition monitoring and monitoring point position visual system in grinding

    Han, W., Yang, W., Guo, Y. B., Jiang, T. & Wang, C. J., 2012, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. 84160L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8416).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Research on parameters of bonnet polishing based on FEA

    Wang, C., Yang, W., Guo, Y., Wang, Z. & Zheng, M., 2012, MEMS, NANO and Smart Systems. p. 486-490 5 p. (Advanced Materials Research; vol. 403-408).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Research on the Precession Angle (PA) adopted in polishing large aspheric mirror

    Wang, C., Yang, W., Wang, Z., Guo, Y., Pan, R. & Lin, J., 2012, Advanced Manufacturing Technology. Trans Tech Publications Ltd, p. 1126-1131 6 p. (Advanced Materials Research; vol. 472-475).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review

  • Study on range selection of key parameters in bonnet polishing using FEA

    Pan, R., Wang, Z. Z., Zhang, D. X., Wang, C. J., Xie, Y. H. & Guo, Y. B., 2012, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. 841613. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8416).

    Research output: Chapter in book / Conference proceedingConference article published in proceeding or bookAcademic researchpeer-review